Comments on: Arduino script for MPU-6050 auto-calibration https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/ Hobby robotics and electronics with Arduino, ESP82666 and Raspberry Pi Mon, 12 Oct 2020 20:07:47 +0000 hourly 1 https://wordpress.org/?v=5.6.11 By: Rasha Ghaddar https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/#comment-360691 Mon, 12 Oct 2020 20:07:47 +0000 http://42bots.com/?p=1674#comment-360691 Hi, I’m working on building a quadcopter that level it self at a certain height,
does this code work?
Or anyone code provide me with a code ?
Thank you

]]> By: satya https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/#comment-304095 Thu, 24 Oct 2019 12:38:32 +0000 http://42bots.com/?p=1674#comment-304095 I have a problem with MPU6050 gyro sensors, I am making school project with Vehicle Accident GPS tracking. When the normal condition, eventhing is ok. Gyro is working his axis,but when over limit gyro’s x,y,z values, LCD and Serial monitor is stop their process. how can i do that?

]]> By: satya https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/#comment-301376 Tue, 24 Sep 2019 13:13:33 +0000 http://42bots.com/?p=1674#comment-301376 I am trying to interface the mpu 650 module to node mcu to calibrating the values for robot i am
trying to useed the display the calibrating values (X-Y axis) please provide the code for node mcu.
thankyou.

]]> By: Issue calibrating MPU-6050 – Arduino Apprentices https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/#comment-298595 Thu, 29 Aug 2019 21:14:40 +0000 http://42bots.com/?p=1674#comment-298595 […] Hi there. I used open source software to try calibrating my MPU-6050 and unfortunately failed. The acceleration and gyroscope values just would not converge. I then tried to calibrate the sensor manually by adjusting the offset with a potentiometer (turn clockwise to increase offset). The problem I came across is that the offset does not really change any value in a linear fashion. Also when I came close, say a x_accel value of -800, a slight increase in offset would increase the x_accel value straight to +800. This happened with all directions. My connections should be right, since the accelerometer reacts to movements just fine. When I let it rest on the table, all values are stable. I basically used the code and methods in this URL: https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/ […]

]]> By: Stephanie Kim https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/#comment-285360 Thu, 17 Jan 2019 11:31:44 +0000 http://42bots.com/?p=1674#comment-285360 Hi! The link to the calibration code is no longer valid; is it possible for you to email me or post the zip file/code please?

]]> By: vivek https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/#comment-254726 Fri, 18 May 2018 07:10:34 +0000 http://42bots.com/?p=1674#comment-254726 Hi
i am trying to use it with 9250, i have changed the reference from 6050 to 9250 but I get an error message
” no matching function for call to ‘MPU9250::MPU9250(int)’ ”
I am a beginner and trying to learn, I have an MPU9250 and would like to cal liberate it, so please explain. I am using MPU9250_master libraries.

]]> By: SMARTER BICYCLE HELMET - BlueXanh.Com https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/#comment-245083 Sat, 03 Mar 2018 15:23:29 +0000 http://42bots.com/?p=1674#comment-245083 […] – MPU6050 tutarial by “Arduino script for MPU-6050 auto-calibration”: http://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/ […]

]]> By: JimD https://42bots.com/tutorials/arduino-script-for-mpu-6050-auto-calibration/#comment-244951 Fri, 02 Mar 2018 12:51:29 +0000 http://42bots.com/?p=1674#comment-244951 In reply to Frank.

Thanks for the complete code.

]]>